Spool click sound produced when the spool turns. This noise comes from cliker / drag click mounted on the inside of the spool. Click drag or clicker or contact with the spool support the biasenya shaped like a gear or toothed. Function of this component is to provide a sound when rope / line pulled out of the spool especially when the bait is struck catches. Most anglers I ask usually feel less shock if there is no sound when the line out of the spool.
For Engineer / Designer , the parameters that need to be cared for in production or design of glass noodles spool click d is that it requires a strong sound but durable. Therefore, the engineer or designer to design a study in itself click while other factors such as material or materials used.
Available various design clicker is. Among his is;
1) Metal Clicker enggages with Metal Spool Support.
Figure 1 : The picture above shows the design of metal vs. metal clicker .
To design this, the clicker can move left and right, meaning, the spool will emit even spool rotated by counterclockwise or clockwise. The sound produced by the design is quite strong but short combination clicker and spool support or critical contact distance. If the distance bersentuhanya first, then the clicker quickly broken. Spring also play an important role, if the strongest stiffness the same, but the sound will be loud clicker will be quickly broken. Thus, the customer can actually adjust the spring stiffness by altering the spring a little corner using long nose pliers or a tapered nozzle. Most design clicker is used by models middle-rank and low rank as part of this system is only involved in some part and quite cheap.
care Tips clicker .
For spool click the method to ensure the spool click durable is always apply grease on the spring or punch area so that the friction between the clicker and punch rod is minimal. Actually the endurance of a clicker has limitations, the clicker has been tested at a speed round spool certain until it is able to withstand the required period or spec. Therefore, it is very important drag setting is done properly so that the spool click is not in the circumstances, the high velocity in the long term unless the catch obtained is very large and can not afford to keep him drag and cause spool berupusing with high velocity.
2) Metal engages with plastics spool clicker support.
Picture 2 : Spool click system that is integrated with drag system.
modular design used by the models are quite expensive as Shimano Stella because a relatively high level of durability and the sound balance and consistency. Normally sound spool click for design like this is only in one direction round the lap time out of the line spool . Components involved in this system is also quite a lot. For tips on care, arguably this design maintenance free except to be cleaned if there is sand or other impurities significantly.
3) Spring type spool support.
Picture 3: Spring type Spool Support.
Designing like this also widely used, particularly in most of the models Daiwa . The sound produced is uneven and the durability is also good. Sound will be produced by both the direction of the spool of rope either out or in.. Such design can also be said free maintenance . Only if there are impurities or sand in the spring, then anglers should clean it.
In conclusion, all the spool click syste m features its own advantages and disadvantages but all this depends on the parameters that need to be taken care of home buyers who demand sound strong and durable, while constrain faced is the design of the clicker, material, engagement distance and cost.
however, for the buyer to ensure that the method click spool lasts longer is to make sure it is kept clean free of impurities, sand or rust. The rules are always doing maintenance to apply grease and oil in certain parts of the system spool click.
No comments:
Post a Comment